Worm get gearbox with motor
worm motor
A robust worm-get gearbox powered by an MM28 engine. Ideal applications where a simple to match, high torque productivity is required. Great for student based projects which includes robots and buggies.
The unit has been designed to ensure that the output shaft could be ‘clicked’ in and out for modification. E.g. reducing to size. The electric motor is snap fitted into its cradle to activate the apparatus and worm.
Details
1 – 6V DC
0.1A to 1A depending on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
Overall dimensions of box + electric motor: 35(W) x 40(H) x 60(L)mm
The primary feature of this high-efficiency gear box is a worm gear, which locks the output shaft whenever the electric motor isn’t turning. The high gear ratios of 216:1 or 336:1 get this to gearbox appropriate for little walking robots, lifting mechanisms, and various other applications where high torque is desired.
The low-voltage motors in the worm gearbox operate on 1.5-4.5 volts and draft to a few amps, making them ideal candidates for the DRV8833 motor driver carrier. Electric motor overheating can be caused by excessive stalling, even at suprisingly low voltages. We recommend that you utilize stall-detection sensors, or just view your robot, to ensure that it doesn’t stall for lots of seconds at a time.
This gearbox includes a 4 mm diameter, round output shaft, which works with the wheels that are appropriate for Tamiya 4 mm, round shafts. Our 3 mm universal installation hub also matches on the smaller threaded end of the shaft, although it is not specifically intended to work with this kind of shaft (the hub’s set screw could harm the thread on the shaft).
Ever-Power gear motors will be economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical right angle worm geared motors set new requirements for reliability, performance and economic climate with unparalleled features including hollow shafts in the tiniest sizes. An inverter friendly style offers easy integration right now and a truly future proof answer. The Ever-Power gear motor offers total versatility in mounting choices includes shaft, base, encounter, and flange alternatives. The motor terminal box can be mounted in substitute positions rotated in 90º steps around the motor frame providing for unparalleled integration options.
Ever-Power gear motors comply with North American and International requirements, including NEMA, IEC, CSA, and CE, the Ever-Power series permits worldwide acceptance, a genuine total remedy for our global clients.
Excellent protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dust tight and hose evidence,and can be used outside or in wet and dusty environments without the use of additional enclosures. Full rated output is available at the output shaft of the machine.
Product Features
Power rating up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Totally enclosed, sealed against dust and water spray
Lubrication change 1st after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Additional features:
Connecting with Connect connectors.
With built-in inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-I, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm equipment motors are the option for applications requiring a good corner turn, optional dual output, or perhaps an inability for the electric motor to be back driven. The DC correct angle equipment motors are designed for constant and intermittent duty operation. Our right angle gear reducers are designed with a number of mounting plate options, making them ideal for a variety of DC engine based applications. You can expect 12 ratios ranging from 5:1 to 100:1.
10309
FEATURES
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Standard brush life of 2000+ time (varies by application)
EP Products Worm Gear Motors are made to generate high torque in a small package size. Worm Equipment Motors are great for applications that want a personal- locking or breaking characteristic since the output shaft can’t rotate when there’s no power used. Also, Worm Gearheads can transfer motion in 90 degrees. With various decrease ratios, precision lower gears, voltages and sizes, EP Products has a DC Worm Gear Motor solution for your application.
Features and Benefits
HIGH Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Capability to Handle Large Gear Reduction Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Protection Door Locks / Industrial Conveying Systems / Security Gates / Oral Chairs / Ambulance Cots & Stretchers Many of our DC Motors could be complimented with one of our Worm Gearheads. EP Products will work with you to create and produce a Worm Gear Motor which will optimize the functionality of your specific application.
Built to your unique requirements
Motor Type: Brushed / Brushless / Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Gear Material
Shaft Configuration: (D Trim / Round / Splined / Other)
General Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Extra Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm electric motor uses a metal gear box for toughness and a high torque output. Because of the special mechanical structure of the worm get the electric motor output shaft is usually self locking and may not be rotated.
This part uses a two wire connection and supports direction control in addition to PWM speed control. Ranked voltage is 12v and can attain 40RPM, with a torque of 8kg/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Ranked Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear devices from EP DRIVESYSTEMS especially show their strength in applications where high gear ratios are essential. Our worm geared motors are as a result optimally suited for make use of in intralogistics, packaging technology and the meals & beverage industry.
Four great known reasons for EP worm geared motors:
Rugged
Our worm geared motors have a high overload capacity
Maintenance Friendly
Washdown versions allow simple and efficient cleaning of the get system.
Corrosion protection
The NSD tupH sealed surface area conversion is exceptionally chemical substance, corrosion and abrasion resistant.
Flexibility
Our modular design give users optimum freedom.
The modular system for optimum flexibility: Our EP worm gear units
There are many applications that require drive systems, and each one of these has its unique requirements. The EP series worm equipment motors can be quickly and effectively adapted to meet your needs.
Worm gear devices impress with their great power density and compact style. If required, we can also source them with the highly effective nsd tupH surface area treatment.
As well as the basic EP casing, you can expect an extensive type of bolt-on parts to customize the merchandise including torque arms, shaft covers and output flanges. These can be easily field installed, but we may also be pleased to assemble the average person components for you.
Find out more about our modular SI worm geared motors!
Find out more
Smooth and Clean: The EP worm equipment unit SMI
SMI worm gear devices feature a smooth, corrosion-resistant alluminum alloy housing. Optional nsd tupH surface area conversion makes this product preferably suited for harsh and demanding industries like meals processing and pharmaceuticals.
Flexible input designs such as NEMA, IEC or immediate motor mounts in additional foot or flange mounted casing designs.
Worm geared motors
Worm geared motors for little power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared electric motor program. The units possess on all sides several repairing possibilities and enable a simple assembling for the customer.
Other drive configurationscan be created by use of built-about components (e.g. torque arm and result flanges). The housings are made in light weight structure out of aluminium die cast. Electric motor attachment is realised in general through IEC adapter B5 or B14A.
Technical Data
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:result shaft, output shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm
Buy Worm Get Gearbox with Motor – incorporating the next features: 1 to 6V voltage ranking, 17100 rpm no load acceleration, 220g-cm stall torque, 3mm shaft size, 60mm long, 35mm wide, 40mm high, a good robust worm drive gearbox powered by an MM28 electric motor (included), most ideal for applications where an easy to match, high torque output is necessary, nylon housing and gear, requires light oil or silicon grease lubrication, well suited for student based projects including robots and buggies.
Most ideal for applications where an easy to fit, high torque end result is required
Perfect for student based projects including robots and buggies
Reversible Excessive torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
Reversible Excessive torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
Features:
The electric motor is Gear DC engine with micro-turbine worm, you can change the wiring-connection to change motor rotation.
Turbo worm geared engine with self-lock, that’s, regarding motor without electrical, the output axis is usually fixed, self-lock.
The reducer output shaft arranged vertically with the engine shaft, whole motor output shaft relatively-short than general gear engine, trusted to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r/min
Result torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the window, door, Mini winch. Ect.
In sumo robot or combat robot competition where great holding torque’s electric motor is essential in order to avoid your robot being pushed by your opponent robot. The worm gear is definitely a better option compared to the spur gear motor. Why is worm gear so particular? Take a look wiki out: Worm Get.
“Unlike with ordinary equipment trains, the direction of transmission (input shaft vs result shaft) is not reversible when using large reduction ratios, because of the higher friction involved between the worm and worm-wheel, when usually a single start (a single spiral) worm can be used. This can be an advantage when it’s desired to remove any probability of the result driving the input.”
In other terms, it is tough to push your load (example, your robot) if the motor is not power or rotate.
Features and Spec:
Metal gear box
Result shaft is self-locking due to the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g

Hope you enjoyed this post, to figure out a lot more on worm motor see our website.