Iron Casting Housing Material Vertical Worm Gear Reducer

Overview

Quick Details

Place of Origin:

Zhejiang, China

Brand Name:

EPT

Gearing Arrangement:

Helical

Output Torque:

up to 54900 Nm

Input Speed:

1450rpm

Output Speed:

refer to technical date

Applicable Industries:

Manufacturing Plant

Bearing:

C&U

housing material:

iron casting

gear material:

20CrMnTi

contact type:

motor, flange

Input type:

Solid shaft

Installation type:

Foot, flange

Material of Shaft:

chromium steel

Output Form:

Solid shaft, hollow shaft

Color:

Green,yellow or according to arequirment.

Supply Ability

Supply Ability:
200 Piece/Pieces per Day

Packaging & Delivery

Packaging Details
cartons&wooden cases or according to customer's requirement
Port
Ningbo or Shanghai
Lead Time
:
Quantity(Pieces) 1 – 10 >10
Est. Time(days) 15 To be negotiated

Online Customization

FEATURS:

1.widely used in turbines, shaft liners and axletrees;good resistance to wear, with high precision in dimensions,low noise, advanced centric runningcastings.

2.With air vent and highprecision.

3.The structure is compact and the weight is large.

4.Packing:wooden cases or can be according to customer’s requriements.

NOTICE:

1. notice of installation

1.1 The base-plate must be plane and stoutness and the base-plate must be screwed down and shock proof.

1.2 The connecting shaft of prime mover, reducer and operation device must be coaxial installation.

1.3 The diameter tolerance zone of input and output shaft is H6, the holes of fittings( such as couplings, belt-pully, sprocket wheel and so on) must properly mate the shaft, which prevents bearing from breakage because of over-loose mate.

1.4 Drivers such as sprocker wheel and gear must be fitted close to bearings in order to reduce bending stress of hanging shaft.

1.5 While assembling motor of WPD reducer, it is necessary that proper amount of butter applies to the warm shaft input hole and keyway, avoiding assembling too tightly and rusting after using for a long time.

1.6 When ordering or using all kinds of WPD type, if the motor weight is binger than the common,supporting set is required.

2.notice of usage

2.1 Before using,please check carefully whether the reducer modle, distance, ratio, input connecting method , output shaft structure, input and output shaft direction and revolving direction accord with required.

Bearing C&U
Material of Housing Casting Iron
Mounting Position Foot mounted, flange mounted
Oil seal NAK
Size 40-250
Rtio 10,15,20,25,30,40,50,60
Material of Shaft chromium steel
Output Form Solid shaft, hollow shaft
Color Green,yellow or according to arequirment.
Product name worm reducer

Install form

MI-M6(see below photo)

Input speed

≤1500(RPM)

output speed

≤392(RPM)

rated power

0.18-160 (kw)

output torque

85-18000(N.m)

series

2-3

transmission ratio

≥3.83

model no

F/FF/FM(17/27/37/47/57/67/77/87/97/107/137/147/167)

Recent Posts

Worm reducer

As one of leading worm reducer manufacturers, suppliers and exporters of mechanical products, We offer worm reducer and many other products.

Please contact us for details.

Mail: [email protected]

Manufacturer supplier exporter of worm reducer.