ep

March 19, 2020

Small Precison Worm Reduction Gearboxes
There are many of specifications you will have to consider when making a worm gearbox selection.
First, what is the input and output torque requirements? Next, check vendor horsepower/torque charts and pick the correct worm gear reducer.
If the size of the gearbox will be an important consideration then check the reducer dimension specs, not all producers make compact units. Actually, working with the right supplier can help you not only find the right gear reducer but also prevent some of the most typical errors in reducer selection. We offer a free guide to help you find the right supplier to utilize.
For low and fractional horsepower application we offer two sizes of worm gear reducer, the SW-1 and the SW-5. Size and torque output will be the major differences between these two models. Both feature either a hollow or solid result shaft. Both models are compact and provide users a wide selection of ratios, including:
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Understanding the specifications of your unique application or project is vital to selecting the correct worm gearbox.
Precision, 6:1 to 100:1 ratios, torque 1 to 10 Nm and multishaft arrangements
M1, M2, M3
Metric Worm Reduction Gearboxes
Little precision with multi-shaft arrangements
• 6:1 to 100:1
• Torque 1 to 10 Nm
Drilled and tapped mounting holes on top and bottom
• Flush fitting bearing caps easy to install
• Input shafts installed on precision ball bearings
• Max. input speed 10000rpm
• Anti backlash version available
Additional Range:
Neckar Worm Gearboxes Type S – 4 sizes available
Smallest gearbox specifications:
• 5:1 to 60:1
• Output Torque: 1.4-2 Nm
• Aluminium housig
• Special steel worm wheel
• Max. load capacity of output shaft 100N radial, 50N Axial
• Max. input speed 5,000 rpm
• Weight: 0.225kg
Where are Correct Angle Worm Gear Motors Used
Anywhere a compact dual shaft gear motor or single shaft gear motor is necessary. This right angle equipment motor is indeed versatile it could work just about anywhere.
Features & Options
Double Shaft or Solitary Shaft
Hollow Shaft
Maximize Torque in a little Package
Wide Gear Ratio
Cost-Effective
Compact Size
Specifications
Rated Torque: 55.3 – 700 g-cm
Rated Speed: 4710-5900 rpm
Rated Current: 240 – 5500 mA
Gear Ratios: 1:50 – 1:1050
Using miniature gears, Ever-Power offers designed and built exclusive, high precision mini gearboxes that cannot be found somewhere else. Our miniature gearboxes can be found in numerous configurations, including worm and wheel, cross axis helical, bevel, inline spur, and more. We are able to also provide customized micro gearboxes that were created and created to meet your unique specifications.
E mail us for the mini gearbox the application requires, or ask for a quote upon a custom micro gearbox.
Micro Gearbox Options
Gearboxes are also known as reducers, gear reducers, rate reducers, equipment drives, and gearmotors. All terms can be used more or less interchangeably. Please note that the links for our little gear drives include info on the full range of body sizes for that series or style.
Bevel Box Micro Gear Drive
Our bevel container miniature gear drives are software rated for the maximum balance of overall performance and price. Torque could be balanced to meet up your RPM and operating life requirements. Light-weight with low backlash performance (as little as 1°, with choice of 1/2”).
Result torque: up to 7 oz.-inches
Low backlash: ≈1°, option of 1/2”
Rated for input speeds up to 2,000 RPM
Temperature range: -5° to 175°F (-20° to 79°C); optional to -40°F (-40°C)
Cross Axis Helical Miniature Gearbox
Ever-Power miniature cross axis helical gearboxes provide relatively high levels of thrust in a concise package. They offer an output shaft at 90° from the input, and are available in equipment ratios from 1:1 to 40:1. Lightweight but long lasting, with machined aluminium housings and hardened alloy metal gears.
High efficiency: up to 88% at 1,000 RPM
Low backlash: only ≤30 arc minutes
Rated for input boosts to 4,000 RPM
“Left hand” models available
Miniature 2 Shaft Worm Gearbox
Our miniature 2 shaft worm gearmotors are engineered for ≤30 arc mins of backlash or better. Also known as “shaft to bore gearboxes,” the unit provide a single insight shaft that protrudes from opposite sides of the housing; output can be a keyed bore. Regular one- and double-end shafts are available and given keys and retainer rings. An array of equipment ratios and input sizes are obtainable to meet up your needs.
High efficiency: up to 86% at 1,000 RPM
Low backlash: ≤30 arc minutes or better
Available in ratios from 5:1 to 120:1
Rated for input speeds up to 3,000 RPM
Miniature 4 Shaft Worm Gearbox
Every miniature 4-shaft worm gearbox from Ever-Power features precision-machined hardened steel gears, solid aluminium housings, and long lasting lubrication. They offer two insight shafts on reverse sides of the body, with two output shafts perpendicular to the insight shafts. Our mini 4 shaft worm equipment drives deliver high performance efficiency with low backlash.
High efficiency: up to 82% at 1,000 RPM
Low backlash: as little as ≈2°
Available with equipment ratios from 1:1 to 32:1
Rated for input boosts to 4,000 RPM
Miniature Flange Worm Equipment Drive
These micro flange worm gearboxes create an output at 90° from the insight. They deliver superior efficiency in a wide variety applications and are built with little footprints, making them perfect for functions where space is bound. They offer high effectiveness with low backlash.
Gear ratios from 6.66:1 to 80:1
High efficiency: up to 83% at 1,000 RPM
Low backlash: only ≤4°
Max. input speed: 3,000 PRM
DC motor option available
Miniature Inline Spur Gearbox
Specially engineered for encoder applications, Ever-Power’ micro inline spur gear drives can be found in two frame sizes, and so are rated for speeds up to 3,000 RPM. Aluminium housings and stainless gears and shafts make these inline spur gearboxes tough and corrosion resistant, for your the majority of demanding applications.
Result torque: up to 125 oz.-inches
Low backlash: as little as 15 arc minutes
Available with equipment ratios from 4.96:1 to 3600:1
Optional synchro cleats available
Compact Wormwheel Gearbox
These miniature right angle worm equipment reducers deliver excellent performance with high efficiency, and show rugged building for challenging power transfer procedures. Available in three equipment ratios (5:1, 10:1, 20:1), our small worm gearboxes are built in extremely small footprints for applications where space is limited.
90° output angle
Gear ratios: 5:1, 10:1, and 20:1
Up to 12.5 inch-lbs. of output torque
Max. input speed: 3,000 RPM
Compact footprint: 1.5” x 1.5” x 1.08”
Custom Miniature Gearbox
Ever-Power can engineer and manufacture a customized miniature gearbox to meet up your unique specifications. We can produce custom micro gearboxes in virtually any configuration the application requires, with output torque levels as high as 900Nm. We can work from your own gearbox designs, reverse engineer an existing unit, or assist you to develop an all-new design that delivers the performance you will need. Demand a quote on a custom made miniature gearbox or contact us to discuss your specific requirements.
The Ever-Power Advantage: Little is No Big Problem
Broadest collection of small gear reducers
Greased for life
Ruggedly built
Modifications and special ratios available
Custom small gearboxes designed to suit
Input & Output Shafts
Input and result shafts with drive essential and retainer rings could be supplied to your specs for just about any of our hollow bore miniature gearboxes. We offer a simple selection of solitary ended or double ended shafts to assemble in these gearboxes. All gearbox shafts are given keys and retainer rings.
For P and PF series worm and wheel gearboxes use our P/PF gearbox shafts.
For Electronic series crossed axis helical gearboxes use our E gearbox shafts.
For F series spur gearboxes, contact our software engineers to discuss your particular needs.
We provide a broad collection of misalignment shaft couplings in in . and metric bore sizes. Inch and metric precision floor shafts can be found from stock.
Contact Us for POWERFUL Miniature Gearboxes
We will be the miniature gearbox professionals. Our micro gear drive versions deliver superior performance in a small footprint, and are tough enough for challenging function environments. Contact us to learn more about our mini gearboxes, or ask for a quote on a custom model that is tailored to your preferences.
Additional advantages of worm drive gearboxes include:

Do you have any suggestions on the small worm gearbox? Please do not wait to call us.