popular searches:Screw jack|Double envelope reducer|Worm gear reducer
Texas Ever-Power Co., Ltd.
Company email:[email protected]
Address: No. 7, Geruide Road, Decheng District, Dezhou City, Shandong Province
In the process of using the worm gear reducer, it is often encountered that the reducer heats up when it is running.Cause the internal worm gear to wear quickly.If there is severe heat generation, please stop working immediately, find out the cause of the heat generation of the worm gear reducer and eliminate it.Because once the worm gear reducer heats up severely, the wear resistance of the worm gear...
The screw jack that everyone often says is a simple transmission equipment with many advantages such as high stability, long service life, small size, light weight, compact structure, wide power source, no noise, and easy installation.According to research, the screw jack is now growing towards innovative technology, and the elevator configuration meets the needs of lower applications,...
Worm gear reducer is a kind of power transmission mechanism. The power transmission uses a gear speed converter to reduce the number of revolutions of the motor (motor) to the required number of revolutions and obtain a larger torque.In the current mechanism used to transmit power and motion, the application range of the reducer is quite wide.Worm and screw...
With the development of industry, in many production operations of construction machinery industry, shipbuilding industry, mining and metallurgy industry, rubber machinery industry, etc., secondary envelope reducers are used as auxiliary tools to complete production needs. The 8000 series reducer matches the speed and transfers between the prime mover and the working machine or actuator...
How to maintain the screw jack to make it work normally? Maintenance of the screw jack: The new screw jack must be filled with enough grease (or lubricating oil) before use. In the future, the quality of the lubricating oil (or grease) must be checked regularly in both Chinese and English. And replace it once 15 days later.In the future, according to...
The main reason for the daily damage of the rotary drive of the screw elevator may be clear to everyone. It is the widely used calculation method of contact stress and static capacity. The rotary drive is uniformly stressed, and the effective contact length of the roller is 80% of the roller length. Prerequisite.Obviously, this premise is not in line with the actual situation...
The relay is the electronic control device on the elevator, which is responsible for regulating and protecting the circuit. It is small, but it has a great effect and cannot be ignored. Correctly connecting the relay can reduce the occurrence of elevator failure and extend the service life. The following editor will share with you Here are the precautions when connecting the relay. ① positive...
After the worm gear reducer device is finished, the no-load test operation should be carried out according to the operating speed, and the time is about 2 hours.After the worm gear reducer has been operating for 2 hours, it can be loaded and tested step by step at 25%, 50%, and 75% loads until it runs at full load.After a period of trial operation of the worm gear reducer under load,...
Many spiral screw elevators will produce a lot of noise after long-term use.Screw lifts can be widely used in machinery, metallurgy, construction, chemical, medical, cultural and health industries.It can accurately control and adjust the height of lifting or propulsion according to a certain procedure. It can be directly driven by a motor or other power, or...
Precautions when refueling the screw jack 1. The screw part of the screw jack is also in long-term movement during use. Although the movement speed is slow, the lubrication of the screw is also essential. In the screw lubrication Block, we recommend using butter lubrication, butter because it has a strong stick...