popular searches:Screw jack|Double envelope reducer|Worm gear reducer
Texas Ever-Power Co., Ltd.
Company email:[email protected]
Address: No. 7, Geruide Road, Decheng District, Dezhou City, Shandong Province
How to lubricate the gear reducer?Regarding the lubrication of the reducer, it is also a very important link for the maintenance of the reducer.Open and semi-open gear reducer drives, or closed gear drives with lower speeds, are usually lubricated periodically by humans, and the lubricant used is lubricating oil or grease.Less...
When using gear reducer equipment, there will always be some unexpected accidents.Sudden failures are those that develop quickly and have a sudden change in nature.Therefore, many maintenance personnel have to deal with this phenomenon.One-time load fracture of a part means that the part is under a slowly increasing or constant load...
The planetary gear reducer uses some flat double enveloping worm gear reducer equipment. Many times it will be used in the gear reducer transmission system. The general gear transmission and planetary transmission are far more researched than the double-ring plate type small tooth difference transmission. It is the research on the fault diagnosis of the double-ring reducer. There is no research...
The double-envelope toroidal worm drive is a new type of worm drive. The worm tooth surface is the enveloping surface of the close surface of the space curve. It uses a plane as the mother surface, and the double-envelope reducer envelops according to a certain relative motion law. The worm gear tooth surface uses the above-mentioned plane enveloping worm tooth surface as the mother surface, through another enveloping motion...
Worm gear reducer is the most commonly used reducer machinery nowadays. In the process of use, sometimes transmission failure will occur. We learned that the failure mode of worm drive of worm gear reducer is similar to gear transmission by consulting relevant information.Due to insufficient stiffness of the worm or manufacturing and installation errors...
Factory inspection requirements of the reducer: 1. The outer surface of the reducer should be smooth and flat.There must be no looseness in the connection parts and the solid parts. 2. Under the rated load and rated speed, the noise of the reducer should not exceed 80db(A), the temperature rise should not exceed 65 degrees, and the maximum oil temperature should not exceed 95 degrees...
The method of reducing the gap of the screw elevator The gap between the worm wheel and the worm of the screw elevator shows the precision of the product. The main reasons that affect the gap of the screw elevator are as follows: XNUMX. Error compensation method The compensation of the axial movement of the screw elevator :First of all, the bearing positioning end surface on the spindle and...
Worm gear reducer is one of the commonly used reducers. In the process of using worm gear reducer, it is inevitable that you will encounter problems.1. Common problems of worm gear reducer and their causes: (2) Transmission pinion helical gear is worn, (1) Bearing (at the worm) is damaged. XNUMX Transmission small helical gear...
The difference between the reducer and the inverter: the reducer is to reduce the speed of the motor (motor) through a mechanical transmission device, and the inverter is to achieve the purpose of adjusting the speed of the motor (motor) by changing the frequency of the alternating current.When the motor speed is reduced by the inverter, energy saving can be achieved.Worm reducer and worm gear reducer...