popular searches:Screw jack|Double envelope reducer|Worm gear reducer
Texas Ever-Power Co., Ltd.
Company email:[email protected]
Address: No. 7, Geruide Road, Decheng District, Dezhou City, Shandong Province
When using worm gear screw lifts, there are mainly SWL worm gear screw lifts and other equipment.The common worm gear screw elevator is mainly composed of a worm gear reducer and a lifting screw. Its deceleration component is a worm drive, and the worm is used to drive the worm wheel to achieve deceleration.The center of the worm wheel is an internal thread structure, which is equivalent to the nut of the lifting screw...
The main reason for the daily damage of the rotary drive of the screw elevator may be clear to everyone. It is the widely used calculation method of contact stress and static capacity. The rotary drive is uniformly stressed, and the effective contact length of the roller is 80% of the roller length. Prerequisite.Obviously, this premise is not in line with the actual situation...
(1) According to the type of lift selected by the customer, make site preparations.For elevators with screw movement, the installation space of the tail pipe must be reserved on site according to the length of the tail pipe (the structure of deep excavation or welding steel structure support can be adopted). (2) Keep the center height of each unit consistent...
When it comes to worm gear reducers, I believe many friends will not feel unfamiliar. Worm gear reducers are also very convenient to use, so they are also selected by many industries.So how can the worm gear reducer do a better job of daily maintenance? What are the maintenance steps that need to be paid attention to? Below...
The advantages of simple operation, strong reliability, and low maintenance rate of screw screw lifts make screw jacks have a wide range of applications. TP screw lifts have an automatic interlocking mechanism, that is, they can support their own weight without using brakes or other locking systems. Jacks Can be used alone or with shafts, couplings, bevel gears...
There are many price factors that will affect the price of worm gear reducer. We should all be aware of this. Our manufacturer has summarized three points for us about the price factors of worm gear reducer. We can refer to: XNUMX. Worm gear The type of worm reducer.right now...
What should you pay attention to when installing the spiral screw elevator? Before the installation of the spiral screw elevator, it is undoubtedly necessary to carry out reasonable cleaning for them. If the standard permits, most of the length of the entire stroke arrangement should be sprayed with suitable lubricating grease. And as some large and medium-sized or stainless steel plate screws...
The screw jack that everyone often says is a simple transmission equipment with many advantages such as high stability, long service life, small size, light weight, compact structure, wide power source, no noise, and easy installation.According to research, the screw jack is now growing towards innovative technology, and the elevator configuration meets the needs of lower applications,...
Analysis on what needs to be paid attention to when using the screw jack 1. The maximum input speed of the screw jack should be 1500rpm. If the stroke is greater than 300mm, you can check the stability of the screw jack according to our company's catalog. 2. The screw elevator is normal...
The worm gear reducer uses a gear speed converter to reduce the number of revolutions of the motor to the required number of revolutions. However, you need to pay attention to the following matters when using the machine for cleaning and maintenance.Note 200: After the worm gear reducer has been running for 300-XNUMX hours, an oil change is required...